Nissan Navara, D40 (2005 – 2015) Engine Oil Capacity Table
|Model||Engine||Capacity/Filter Capacity Litres(liters)||Oil Change Intervals|
|Navara 2.5 dCi (2005 – 2007)||YD25DDTi||7.6 / 0.5||30 000 km/ 24 months|
|Navara 2.5 dCi DPF (2007 – 2010)||YD25DDTi||6.9 / 0.5||30 000 km/ 24 months|
|Navara 2.5 dCi (140 kW) (2010 – 2015)||YD25DDTi||6.9 / 0.4||30 000 km/ 24 months|
|Navara 2.5 dCi (140 kW) AWD (2010 – 2015)||YD25DDTi||6.9 / 0.4||30 000 km/ 24 months|
|Navara 2.5 dCi (140 kW) DPF (2010 – 2015)||YD25DDTi||6.9 / 0.4||30 000 km/ 24 months|
|Navara 2.5 dCi (140 kW) DPF AWD (2010 – 2015)||YD25DDTi||6.9 / 0.4||30 000 km/ 24 months|
|Navara 3.0 dCi V6 2WD (2010 – 2015)||V9X||7.1 / 0.6||30 000 km/ 24 months|
|Navara 3.0 dCi V6 4WD (2010 – 2015)||V9X||7.1 / 0.6||30 000 km/ 24 months|
What is the best engine oil for a Navara D40?
The best engine oil for a Navara D40 varies as there are 8 different types of Navara D40. Generally speaking, the Navara will take either an SAE 5W-30 or 5W-40 engine oil.
The manufacturer recommends a high quality SAE 5W-30 engine oil, like the Pennzoil SAE 5W-30.
There are many brands to choose from. We would go for the highest quality, rather than a cheap and cheerful option.
Something like the Pennzoil Platinum full synthetic SAE 5W-30 motor oil, will do the trick when it comes to providing your Nissan Navara D40 with a high quality engine oil.
Why Choose The Pennzoil Platinum SAE 5W-30?
This engine oil is a high-quality base oil, which contains fewer impurities than base oils made from crude oil. When you combine this with Pennzoil’s advanced additive technology, it creates one of the best formulations on the engine oil market.
The full synthetic products offered by Pennzoil Platinum conform to the demanding standards set forth by the industry’s most reputable automobile manufacturers.
Where Can I Buy The Pennzoil Platinum SAE 5W-30?
The Pennzoil Platinum SAE 5W-30 engine oil can be purchased pretty much anywhere online. Amazon.com tend to have high stock levels of Pennzoil engine oils, so I would check there first.
With a few searches via Google or Bing.com, you will find an abundance of online retailers where you can purchase your engine oil for your Nissan Navara D40.
How to change oil filter and engine oil on NISSAN Navara D40
Here’s the tools you will need to successfully change the oil filter and engine oil on your NISSAN Navara D40. I’ve provided you with Amazon links to each product, should you need any of them to complete your oil change.
- Replace the oil filter every time when changing motor oil.
- All work should be done with the engine stopped.
- Wear gloves to prevent contact with hot liquid.
Step-by-Step Guide to Changing the Oil Filter in a Nissan Navara (D40 Series)
Step 1: Safely elevate the vehicle either with a jack or by positioning it over an inspection pit. Tip: Ensure the vehicle is level. If at an angle, the drain plug should be the lowest point.
Step 2: Position a container with a minimum 6-liter capacity beneath the oil drain plug.
Step 3: Carefully unscrew and remove the oil filter.
Step 4: Dispose of the old oil filter in the container. Note: The oil will begin draining immediately after the filter’s removal.
Step 5: Clean the area where the oil filter attaches. Then, install the new oil filter, turning until snug.
Step 6: Remove the oil pan’s drain plug using a #14 socket and a ratchet wrench.
Step 7: Allow all the old oil to drain into the container. Caution: Be mindful of hot oil and wait for the complete drainage.
Step 8: Clean the area surrounding the oil pan’s drainage hole.
Step 9: Install a new drain plug. Using a #14 socket and a torque wrench, tighten to 25 Nm torque.
Step 10: For added cleanliness, use an all-purpose cleaning spray on the oil pan drainage hole area.
Step 11: Safely lower the vehicle back to the ground. Proceed to open the vehicle’s hood.
Step 12: Place a fender protection cover to avoid potential damage to the car’s paint and plastic components.
Step 13: Remove the oil filler cap.
Step 14: Position a funnel in the oil fill opening.
Step 15: Pour in the new engine oil. Ensure you’re using the quantity and type recommended by Nissan.
Step 16: Using the vehicle’s dipstick, check the oil level. If needed, add more until the oil level is between the Min and Max indicators.
Step 17: Reinstall the oil filler cap.
Step 18: Ensure the oil filler cap is tightened securely.
Step 19: Start the vehicle’s engine. Allow it to run until the oil pressure warning light deactivates, then turn off the engine.
Step 20: Wait for 5 minutes, then recheck the oil level with the dipstick. Adjust if necessary and ensure all components (like the drain plug and oil filter) are tight.
Step 21: Remove the fender protection cover and close the vehicle’s hood securely.
Remember: Always follow safety guidelines when working on vehicles and dispose of old oil responsibly.